It has been a few days and you’ve noticed that your newly painted walls are damaged. This is a very common issue that every person faces with Valspar paint. We know how painful it is to see your newly painted wall damaged.
But do not worry because we know the solutions!
So what are the common problems with Valspar paint?
The most common problem that everyone makes is poor preparation before painting. On top of that, the walls have small holes and cracks. Poor paint adhesion, paint drips, mildew, water stains, hat banding, are also some of them. However, these can be fixed.
To know more about the problems, continue reading. We have got some effective solutions that you can use to solve or alleviate the problems with Valspar paint.
So what are you waiting for? Let’s start!
9 Common Problems With Valspar Paint
Although Valspar is a well-known brand for paint, it comes with a few drawbacks. The users may face some common issues that can be troublesome. But the good thing is these can be solved easily.
We have mentioned 9 common problems with their solutions, so continue reading!
Problem 1: Not Preparing
Not preparing the surface properly is the biggest mistake that people make before coloring. If you fail to prepare then your color finishing will be of poor quality.
To tackle this problem you have to ensure that the surface of the wall is smooth before painting. Protect carpets and other objects around them by using dust sheets.
Problem 2: Cracks And Small Holes
You may find cracks and holes on your paint surface. These are apparently very common in every house but they can be fixed. Fixing it will require tools and a little effort.
This can be dealt with by using coarse grit sandpaper on the cracked or hole area. Use a damp cloth to clean the area and a knife to spread to a thin layer.
Let the area dry and flush the area with fine-grit sandpaper. Remove dust using a damp rag and you are ready to paint.
Problem 3: Poor Paint Adhesion
This happens when the quality of the paint peels or cracks from the interior surface of the wall. This happens due to dirt or excessive glossiness.
The solution is to remove contamination and paint in parts that are not adhering. Deal with glossiness by sanding and using a quality primer to prime the surface. Here are our suggestions on good quality primers-
Problem 4: Paint Drips
Paint drips are noticeable on the surface. This isn’t unusual with paints. Most users face this issue. However, this has an easy fix.
Use a scraper to away the drip until the paint becomes even with the wall. Before you paint, make the surface smooth by using fine-grit sandpaper. In case you’re looking for good quality sandpaper, here are our suggestions-
Problem 5: Mildew
This is mold growing in moist areas of the wall. It cannot be killed using regular soaps or mildew-resistant coatings. It is green in color and needs to be killed before you paint. If you do not kill it before painting, it will grow back.
To kill it use a commercial mildew remover or liquid chlorine bleach and start scrubbing. Avoid skin contact when you do it. Rinse the area thoroughly and use a mildew-resistant coating to finish the area.
Problem 6: Water Stains
This occurs as a result of the substrate behind the paint firm. This is visible in ceiling tiles which have dark brown water spots.
Find the source or tile of stain and repair it. Apply stain-blocking primer and paint the area with acrylic latex paint.
Problem 7: Hat Banding
These are the visible vertical and horizontal lines on the side or around the corner of the wall. This can be dealt with by cutting a section of one wall and rolling it on the area while the paint is wet.
If the condition does not change they repaint the area.
Problem 8: Mud Cracking
These are tiny hairline cracks on the painted surface of the wall. Takes place then the painting is done very roughly or when the surface temperature is cold.
Coat the area with primer before you paint.
Problem 9: Poor Paint Hide
This is when parts of your show poor quality paint. This might happen when the paint or brushes are of poor quality or the paint is overspread.
Use premium quality paints and brushes to solve this matter. Make sure to check the coverage when you paint.
You can purchase your set of premium paints and brushes from these recommended products below.
These are the best ones in the market. And you can use this without any worries!
Maintaining your paint surface is quite important to avoid these problems. Scrubbing the area of paint will make your paint last longer. This is because the top layer won’t come off easily.
Use cleaning products and a sponge when you scrub. Wait for 7 days at least to let the paint dry out before you scrub.
The maintenance cost of Valspar paint is around $75-80.
That’s all we had on Valspar paint problems. We hope this guide was helpful!
Frequently Asked Questions
Question: Why is Valspar paint peeling?
Answer: This happens when the dry paint film loses adhesion. The painted layer coming off needs to be scrubbed and the glossiness needs to be removed before you paint it again.
Question: Is Valspar paint permeable?
Answer: Valspar paints are microporous which means they are permeable. These specialists’ paints act as a barrier to water but let water vapor through.
Question: How do you stop Valspar paint from smelling?
Answer: Use baking soda to stop the smell. To use it, pour it into your bowl and scatter it around the room. Leave the room overnight and clean them in the morning when the smell goes away.
By now you have an idea of some of the common problems with Valspar paint. These solutions might be useful when you are looking to solve the problems.
Before you buy Valspar paint keep these problems in mind. Consciously decide which paint will be the best for you. Good Luck!
- How To Cut Metal With A Dremel (From Hobbyist to Pro) - March 25, 2023
- How to Cut Wood with a Dremel (Comprehensive Tutorial) - March 23, 2023
- Does Wood Glue Work On MDF? (All You Need To Know) - September 30, 2022