Best Glue For Plywood (5 Elites) in 2021

It’s frustrating! 

And, why won’t it be? It’s not easy finding the right glue for your plywood. After all, you don’t want to be stranded with adhesion issues and all.

On top of that, you might not even get your desired finish. Some are left with the clear finish while others are left with the bubbly finish. 

Whatever the case is, you’ll need the best glue for plywood. And for that, we’ve analyzed the market and researched for around 2 weeks.

After thorough testing, we’re down to the last 5. We’ve prepared them based on the best to the worst. 

Added to that, we’ve even dedicated different informative portions. This will enhance your knowledge and clear your idea out regarding this matter. 

That’s not it, we’ve even mentioned some answers to your common queries. So, you definitely want to give that a go- 

1. Elmer’s E7010 Wood Glue

At A Glance

  • Size: 8 fl oz
  • Compatible Surface: Wood
  • Material Type: Liquid
  • Color: Tan

We’re here with the first product on our list- Elmer’s E7010 Wood Glue. And, we’ve chosen it as the first product because of its simplicity. You’ll see a lot of products in the market that claims to be the best with great features. 

But, this product right here follows only a single philosophy. That is to keep everything simple and straightforward. Enough of that, let’s begin with the real deal- 

The unique standpoint of this product is the 8 fl oz size. No other product in this list follows this size bracket. Well, we’re going to see larger products and small products than this one. But, we personally believe this size is enough to cover most spaces. Also, the bonding of this product is stronger than the other ones. 

While there isn’t a metric to decide the bonding power of the products. But, we believe it’s strong enough compared to the rest. So, when this glue is used on the plywood panels, it’ll hold everything tightly.

This is why you’ll see this glue used on the repairs of homes or offices. And, it’s certainly a great option when used in carpentry. 

Another fantastic yet simple thing about this product is the non-toxic formula. Due to this formula, the children or pets won’t face harm from this product. However, it’s considered that Elmer’s glue might not be safe for fish. So, be careful while using this on aquariums. 

It even follows a low-odor formula too. So, no harsh smells around after using this product. 

As it isn’t made with toxic substances, it’s easier to clean. Yeah, you’ll just need to run the area with water and the materials will come off. 

Before we bragged about how easy you can use this product. That statement doesn’t change at all. As this is liquid glue, just hold the tip over the surface and the glue will stick. The strong adhesives come into play! 

Now, moving on to the drying time, it dries faster honestly. You have an overall clamp time from 20-30min (approx.) and the full bond time takes around a whole day. 

The overall finish of this glue is a plain-clear finish. So, that won’t change either. And, the end color is tan. Hence, it looks decent!

Many people claim that it doesn’t add an “interesting” touch to the aesthetics. But, some people love plain old style. That’s it! 

Lastly, the only complaint we had about this product is the nozzle! It’s good but the glue keeps getting stuck inside. As a result, you’ll need to clean it again and again. 

2. Gorilla Polyurethane Glue

At A Glance

  • Size: 4 fl oz
  • Color: Tan-brown
  • Compatible Surface: Wood, Metal, Concrete, Glass
  • Method of Installation: Self-Adhesive

Moving on, it’s time for the runners-up for this list. We’ve never seen any other product give this much competition to the first one. In fact, we could crown it as the best one in terms of adhesion. 

The Gorilla Glue has a reputation for being the strongest bond out there. Compared to the previous product, this one follows a versatile formula. So, let’s have a look- 

The end color after using this glue is Tan-Brown. This is a unique feature of this product. We’ve complained about the previous product lacking a “punch”. This one looks good after drying! It also follows a 4 fl oz size which is a bit smaller. So, it misses out on some bonus points here.

Yeah, it’s a bit smaller in size. You won’t get a lot of product out of this one. So, you might need to purchase it again and again. 

Let’s talk about the material and specifications- 

It comes with a polyurethane formula. The secret behind the incredible industrial bonding is due to this formula. Here, the glue will bond incredibly hard and keep the plywood panels together. 

We believe the best thing about this particular product is the 100% waterproofing. So, water doesn’t affect it, by any means. So, you could use this product on the exterior home repairs too. That’s a plus point! 

After you’re done with the work, you could go ahead and paint or stain over this glue. It doesn’t affect the material in any way.

Now, you don’t get the “easy” application like the previous product. There’s surface preparation with this product along with some key guidelines. Fret not, it’s not fancy. 

You’ll just need to dampen and prepare the surface, first of all. Then, clean the surface to take the dust off of it. It needs to be tight-fitting too. And, if you’re using shiny surfaces like metal, roughen the material up! 

When we spoke about surface damping, we meant that you need to just lightly spray the surface with water. Then, dry the excess water off the surface.

Next, apply the product from the tip and make sure you’re not using too much. 

After that, clamp both the surfaces and wait for some time. Tap both the surface and make sure the glue is spread evenly to all the areas. 

Now, you just need to wait. But, you won’t have to wait for long. It takes 1-2 hours to clamp and a whole day to cure completely. Lastly, the cleaning process is easier as well. Just wipe everything off with water. 

In the end, the product holds everything tightly and doesn’t leak water or anything. It doesn’t even allow moisture to settle. But, the thing we didn’t like is the bubbly finish of this glue.

Other finishes in this list will be mostly clear or glossy. But, the bubbly finish doesn’t look premium. Apart from that, we give full marks for the adhesion as it’ll last for a long time. 

3. Titebond II Glue

At A Glance

  • Size: 16 fl oz.
  • Compatible Surface: Wood
  • Setting Time: 10-30minutes
  • Color: Honey Cream

Let’s welcome Titebond II Glue, another amazing glue for your plywood panels. Here, the thing that sets this glue apart is the color and size. 

Speaking of that, the glue comes in a honey cream color. Honestly, it looks quite elegant. The overall clear finish provides an impressive touch! Also, the large 16 fl oz is the highest in this list. So, that’s it about the unique aspects of this particular product. 

Compared to the previous product, this one takes less time to set. All you have to do is apply it, it’ll then take around 11-30 minutes.

But, temperature and the overall moisture of wood do play a part. Here, you can experience longer or quicker setting time. 

But, overall, it’ll take around a whole day to prepare for the full bonding. Now, the bonding in this glue is impressive.

But, it does lack behind the previous two. Even though there isn’t any metric, we still found a bit of lacking here. 

That said, it does maintain the non-flammable and non-toxic formula. That’s a relief if you ask me! Having non-toxic elements inside this glue, the overall product is quite easier to clean and wash off. Just run it through the water. 

Also, once the product sets completely, it’s water-resistant to the touch! So, there’s no problem with this glue adding to the exterior. You can even paint over the glue once it’s dried alright! 

The only con of this glue is the artificial finish. Yeah, it makes the interior/exterior look beautiful due to the Honey Cream color. But, it looks artificial. 

That’s it! This glue works excellent with plywood mainly because of the tight bonding. So, yeah a solid product for the price.

4. DAP 00107 107 

At A Glance

  • Size: 3 fl oz
  • Material: Contact Cement
  • Color: Tan
  • Dimension: ‎1.4 x 2 x 4.35 inches 

Presenting the 4th Glue in our list for plywood- DAP 00107 107. When we went through our list, we found out that this one maintains a great price-quality ratio. Let’s check it out- 

Yes, it’s the most affordable one on this list. Now, budget isn’t the main concern since the products don’t cost that much. But, you could easily save some money and still get a lot of benefits for the price. And, the “contact cement” material secures a permanent bond really quickly.

The best use of this product is the water-resistant capability. Here, the glue resists water and other chemicals all the time. So, it has a decent lifespan when compared to the other products in this list. 

Also, as the product is water-proof, you can easily use it for outdoor applications. Another thing we loved is the use of this product as a sealant. 

Yes, the bonding of this glue is so tight that you can even use it as a sealant. Apart from tightening plywood panels together, this product works pretty well with being used as a sealant. So, plus points for the versatility. 

It smells a bit, however. You don’t get the low-odor formula in this one. So, get ready for some pungent smell. But, to the defense of this product, it’s not unbearable, by any means. 

It comes with a tan finish. So, it looks pretty okay and you’ll be pleased. No fancy texture would be there, however. So, if that’s what you’re expecting, you won’t find it with this one. 

The downside of this product is the 3 fl oz. You’ll need to purchase this product again because of this. Honestly, the size is pretty low when compared to the other high-end ones. 

If the size was large, it would have benefited since you could’ve saved more money. But, hey, it’s the least expensive product for a reason! 

5. GLUE MASTERS (CA) Super Glue

At A Glance

  • Volume: 16 fl oz
  • Weight: 4 oz
  • Material: Cyanoacrylate
  • Compatible Surface: Fabric, Wood
  • Settle Time: (60-90) seconds

Done! We’re presenting the final one on our list. The Glue Masters Super Glue is the last yet one of the few better ones. After all, we’ve compared and tested it against a lot of products in the market. 

So, here goes the details- 

First off, it comes with the material “Cyanoacrylate”. It’s used in this product only. And, the manufacturers claim that the glue is stronger due to this material. The impressive part about this glue, however, is the 60-90 seconds of settling time. It settles fast, alright!  

Everything about this product is easy and simple. All you have to do is pour this product and let the magic happen. Here, the instant glue settles faster and cures fast too. 

It even has a thicker viscosity that’ll offer superior control. But, how? Well, it’ll provide an even and effective flow rate so that the glue is spread evenly. As the glue spreads evenly, the panels will bond tightly. 

The glue has an easy enough application. But, it even has an easier cleanup. Run it through water after it dries completely. That’ll clear off most of the glue from the surface. 

Apart from that, this particular glue is known for its versatility. And, how is that? Well, this glue can repair wood, fabric, and many other things. You can even use it on home repairs as it works great with plywood. 

The 16 fl oz size is more than enough for this glue to be used on different kinds of surfaces. Just make sure you’re wearing protection- gloves, and masks before working with this product. 

Lastly, we noticed that the applicator isn’t durable enough. So, there were problems using this product. Some people even complained about their applicators breaking down. Ours didn’t have this problem, however! 

Best Adhesive for Plywood

best glue for plywood

When you’re attaching plywood with other woods, nothing works better than the Gorilla Glue! We’ve spoken about Gorilla Glue in this list. And yes, that’s the best type of adhesive for the plywood. 

After that, all types of Super Glue work better at attaching plywood with any type of wood. Here, thicker glues work better instead of water-based glue.

Because water-based glue soaks in grain, they aren’t the ideal thing to be used here. So, go for the thicker glues like Super Glue//Gorilla Glue!

Application Process: The Key Steps

We’ve seen a lot in this article already! Apart from looking at the list, we’ve seen a couple of informative points, by now. But, you’ll need to know the application process after all. 

So, we’ve prepared some step-step processes to know how to glue the plywood together. Let’s take a look- 

Tools Needed

You’ll need the following- 

  • Clamps
  • Glue
  • Small stick
  • Gloves, mask
  • Sawhorse

How to Apply Glue to Plywood

As you’re done collecting all the tools, let’s begin with the step-step process- 

Step 1: Inspect the Wood

Firstly, you’ll need to inspect the sides of the wood before starting the work. So, check both sides and choose the one you prefer the most. You’ll need to keep the good side in a downward manner. 

Step 2: Apply Glue on Plywood

Now that you’ve inspected the sides of the wood, it’s time to apply the glue. Squirt the glue from the bottle. Then, you’ll need to place the glue evenly and create a layer. 

Here, the small stick will help out a lot. You’ll need to put the flat stick and then spread evenly so that all the sides get the right amount of glue. 

Step 3: Place Both Sides Together

Once you’ve created an extra glue layer on the top of the wood. It’s time to bring in another side of the wood. Here, choose the good side and place both sides together. 

Gently tap so that the glue can reach all the corners of the wood. 

Step 4: Place the Clamps

Now, that you’ve used up all the glues with the sides of the wood, place the clamps. Next, using the clamps, tighten the sides until the glue comes out from them. Only then, you’ll need to just wait and let the sides of the wood dry. 

After this, only use the surface when it’s dried to the touch. It’ll take around an hour or so. 

Cleanup: What’s the Right Metric?

Cleanup is important! Because after you’re done with the gluing, you need to clean everything up. But, the process will be hard if you don’t know the metrics. 

Here, water-based glues are the easiest ones to clean. All you need to do is just run water along the surfaces and it’ll wipe off the glue. Also, you could wipe off the glued surface with a damp cloth. 

Also, if the glue is water-proof then you don’t run the risk of damaging it. But, right after the surface dries, use water over it. That’ll take care of everything. 

Setting/Drying Time: Most Important Factor?

Now, the setting and drying time is an important factor. Only then, you’ll know that the surface is ready or not. But, this time varies depending on some factors. Out of them, temperature and moisture play a part. 

Here, due to the increase in temperature and moisture in the environment, the glue could dry faster or slower. 

On the other hand, the drying time in the glue varies upon different products as well. Some of these products have a faster drying time. While the others have a slow drying time. 

Color and Finish Factor: Clear Vs Bubbly Finish

If you’ve observed the list of our best 5 products then you would’ve noticed the different colors of the products. Mostly, people prefer a tan color of the glue. 

A tan color doesn’t seem boring at first glance. Also, it isn’t that overwhelming too. It just creates the right balance between minimalism and elegance. 

So, you could settle for that color. But, there are other colors available. If you want a bit different, go for the honey cream color.

That’ll add a unique touch. Otherwise, the dark brown or dark tan color will add a sense of sophistication. 

Whatever the case is, you’ll be the one to decide what suits you! 

Other than that, there are clear finishes and bubbly finishes. The clear finishes look elegant and neat. Here, it’s completely natural and easy to differentiate. 

Whereas, the bubbly finish of the glue makes it look artificial. Some people do prefer this over the clear finish. So, you’ll have to decide whether you want this finished or not. 

Some Bonus Tips for Effective Application

That’s it, you’ve heard a lot from us. Now that we’ve told you about the application process, it’s time to learn about some little tricks and tips. This is our way of thanking you for sticking until the end. 

Let’s give it a watch-

  • Always wear protective gear like masks and gloves.
  • Wear eyeshades to protect the eyes. 
  • Use a thin brush to add glue to the sides. 
  • Tap in the plywood so that glue can reach evenly to all the surfaces.
  • Clean the places right after the glue is dried to the touch.
  • Use a small stick to flatten out the edges.
  • Tap in the plywood to spread glue evenly.

Frequently Asked Questions

Question: What type of glue is the best when using for plywood?

Answer: Gorilla Glue is the best type of glue in plywood. Here, thicker glues are better. So, you can use Super Glue as well. 

Question: Is it possible to glue plywood?

Answer: Yes, gluing plywood panels is possible. To put two plywood panels together, you’ll need glue and clamps. 

Question: Can you glue the edges of plywood? 

Answer: Yes, you can glue the edges of the plywood. But, it’s going to be a hard task. 

Final Words

That’s it, friend! We’re finally done with this guide. Congratulations on reading it to the end. With this section, we’d like to put the curtains on the best glue for plywood

Hopefully, you got what you’ve been looking for from this list. If not, check the list again and look for the unique factors. Apart from that, check our informative points to have a clear idea about this topic. 

Good luck on your journey!

Leave a Comment

Your email address will not be published.