If you’re someone who loves carpentry at home, you’ve had confusion when choosing blades. It’s also normal to worry if your blades are durable or not.
While every blade seems the same, there are minor differences between them. And we’re here to talk about the differences between Freud and diablo.
Having a hard time when it comes to Freud vs diablo?
It’s nothing to get too worked on. As we’ve mentioned, the differences are not that many. The diablo is great for general purposes and also cuts through metal and wood. On the other hand, the Freud blade can do short or long rips and cross-cutting. The Freud is also slightly larger than the diablo.
This small amount of information cannot satisfy you. Hence, we’ve got all the information you want! But both are unique in their way.
SKIP AHEAD
Freud vs Diablo: Quick Comparison
Before we get into the article let’s briefly look into the factors.
Factors | Freud | Diablo |
---|---|---|
Size | 9" x 56T | 6 1/2 inches |
Teeth | No carbide teeth | Carbide teeth |
Usability | Easy to use | Easy to use |
Price | $8-$800 | $9-$8000 |
Durability | 12 to 120 hours of use | 12 to 120 hours of use |
Maintenance | Easy to maintain | Easy to maintain |
This is just a mere description of the differences between the two blades. The next part contains even more information that will make your decision even better!
Freud vs Diablo: In-depth Comparison
Now it’s time to dig deep into the diablo vs Freud dispute.
Size and Features
There are 24 carbide teeth on the diablo with high density. It also has the features to give you control and tracking with its three-toothed grind. It has a 1/16-inch ultra-thin kerf.
This ultra-thin kerf gives you the ability to squeeze through old framing members. Also helps to reduce the circular saw’s work. Giving you an increased number of cuts in the middle of battery charges.
This blade also adjusts with a circular saw of ⅝-inches. And the sizes of this saw are 7-¼-inch and 6-½-inch. The built-in laser-vent stabilizer helps to decrease vibration and noise.
On the blade, you’ll find some heat expansion slots which are L-shaped. These slots will help heat buildup in the blade for a consistent quality cut. There is a carbide formula that is shock-resistant TiCo Hi-density in the carbide teeth.
The formula helps the sharpness of the blade to be 4 times that of a typical carbide. The red coating of the blade keeps the blade from corroding and gumming. Because uncoating will create burns, causing kickback and gemming up.
The diablo also has a diamond rim. Diablo uses a cermet blend for the teeth. The weight of the blade is 2.39 pounds or 1326 grams.
It has about 72 teeth on the blade.
Freud saw blades come in sets of 3. The blades are 24 tilts, 40 tilts, and 60 tilts. The 24-tilt blade comes with larger gullets. The 24-tilt blade comes with fewer teeth.
The fewer teeth give more efficient cuts. The large gullet of this blade helps to remove a certain material. This material burns your timber as you’re going through the long rips.
The blades also have a backward-facing tilt but no carbide teeth. The 40 and 60-tilt blades have more teeth. All of them have the anti-kickback tail facing in the backward direction.
Freud also has a moisture saw blade, which is a 12-inch blade. And its 72-tilt blade is good for cross-cutting as well. There’s also a difference between red and silver Freud blades.
Performance
The diablo cuts through heavy metal very quickly. The teeth also stay quite intact after cutting with them. This blade is good for tile work.
The diablo can be cut through masonry, tile, stone, and brick. These blades are made for rigid Milwaukee, Ryobi and the Dewalt 3-inch cut-off saw. Though the Dewalt has some problems at times.
You can cut with it and clean up with it as well. You can also use the edges to make whatever you’re cutting smooth. If you’re on a flatter surface you can cut it without snapping or breaking it.
You also don’t need to use water with this blade. This blade lasts through several cuts and remains as sharp as ever. It cuts through studs, angle iron, plates, bars, pipes, EMT conduit, and threaded rods.
It takes a diablo 1.36 seconds to cut through a mild tube. 5.8 seconds to cut through an angle iron and 574 seconds to cut through small particles. Diablo blades are typically used for general purposes.
Both metal and wood can be cut by using a diablo blade.
Now for the Freud blade as we’ve mentioned there are 3 sets. The 24-tilt blade is used for long rips. On the other hand, the 40-tilt blade is not for ripping.
But the 40-tilt blade can be used for finished rip cuts. This blade will give you a much cleaner cut. Not more efficient than the 24-tilt blade. These blades are generally called combination blades.
This blade is better for doing light or general work. Since the 62 tilt has a lot more teeth it will give a much finer and cleaner cut. And the kickback tail blade will also give a much finer cut.
But the blade will not remove the material completely but it’s better for going across a wood fiber. The Freud blades are great for SawStop as well!
Maintenance
The maintenance of both blades is similar. Like all blades, you will need to keep them clean. You don’t need to clean your circular saw as often.
But you do need to clean your blades as much as you use them. The first thing you have to maintain for both blades is the sharpness of the tooth. If you notice that the teeth have gotten dull then you need to sharpen them.
If you’re using a Freud or Diablo with carbide teeth they have to be professionally sharpened. But with normal teeth, you can sharpen them at home with a triangular metal file. You can clean your blade with any type of cleaner.
But a citrus cleaner can be your best option. Before starting to clean you should take the blade out of the saw. Be sure to unplug the saw before doing this.
We recommend using a glove for safety issues. Then prepare the solution of your choice. After this, soak the blade in the cleaning solution for about 10 minutes.
When it’s done soaking, start scrubbing. You can use a brass brush or toothbrush for the scrubbing process. If you want a rigger scrub you can trim the toothbrush’s bristles to half a length.
If you notice heavy grime consider using a steel bristle brush. However, if your blade is coated with Teflon avoid doing this. Once you’re done with all these steps, rinse and dry.
But be extra sure that there are no damp spots between the teeth. The final step is to reinstall the blade. And your diablo blade or Freud blade will be as good as new.
Price
The price of both blades is reasonable. They start at the cheapest price. But some diablo blades can be a little expensive.
Both blades start at around 8 dollars. And can go up to more than 500 dollars. But some diablo blades can go up to 7000 dollars.
Final Verdict
We’ve concluded that both blades are very efficient in their own way. It is said that diablo saw blades tend to last longer. But Freud saw blades have a lot more variety.
Though the differences are not big, Diablo is known to be more efficient than Freud. It has little details here and there that can make your cutting process even easier.
FAQs
Given below are some commonly asked questions that you can relate to!-
Does having more teeth on a saw blade make it better?
Yes, it does in a way make it better. If a blade has more teeth it can give you a finer and smoother cut. Then again, blades with fewer teeth will give you a rougher but faster cut. But a 24-tooth blade is enough for general work.
Which saw blades can give you the smoothest cut?
The blades that don’t have much space between the teeth can give a smooth cut. The cross-cut blades are known to remove less material. But, with a smoother cut comes a slower cutting process. But cross-cut blades are usually the one that is most recommended by carpenters.
Which saw blade is best for hardwood?
The rip blade is the best for cutting hardwood. This blade is specifically made for cutting wood fibers. As a result, it leaves behind a clean edge after cutting through the hardwood. There are 10 to 40 flat-topped teeth on these rip blades.
Conclusion
We hope by now you’ve made the pick on Freud vs diablo. Having a better blade is very important when you’re the one doing all your woodwork on your own. Even to a carpenter, it is very important.
The choice between the two depends on what you’re working with. So, choose wisely! Happy carpeting!
- How To Hide A Shed From HOA (5 Easy Hacks) - September 8, 2023
- How to Hang Tools in a Suncast Shed (7 Easy Steps) - August 31, 2023
- How To Hang Stuff In Resin Sheds (5 Easy Steps) - August 29, 2023