Anchorseal Vs Anchorseal 2 (Detailed Comparison)

When it comes to wood sealers no other product beats Anchorseal. Anchorseal 2 is the eco-friendly version of it. Naturally, comparison comes between both products.

So people ask which one is better among anchorseal vs anchorseal 2?

Between anchorseal vs anchorseal 2, the original anchorseal is the superior one. Although it is not labeled as eco-friendly, it’s more stable and easier to use. The cost is also less for the original version. Anchorseal 2 is rather costlier as it claims to be eco-friendly.

No products found.

That was the sneak peek of our topic today. Care to know more? Then keep reading our piece till the end.

Let’s begin!

A Short Comparison Between Anchorseal Vs Anchorseal 2

Before we move on to our detailed discussion let’s take a look at this table. Here are the main differences between Anchorseal and Anchorseal 2:

Aspects Anchorseal Anchorseal 2 Winner
Product difference Not eco-friendly Eco-friendly Anchorseal 2
Stability Better stability Lacks stability Anchorseal
Ease of application Better Good Anchorseal
Cost Less costly Can be costlier Anchorseal

Those were the surface ideas. Ready for detailed discussions? Then, let’s move on to our next segment.

Anchorseal Vs Anchorseal 2: Detailed Comparison

The newer version of Anchorseal has caused quite a debate among users. Hence people are comparing Anchorseal 1 and 2. 

To know which one of them is superior we’ve done thorough research. And from there we reached our conclusion. So, let’s jump right to it.

1. Product Difference

Anchorseal and Anchorseal 2 both are developed almost in the same procedure. Both products have significant similarities. But there’s a little difference in the product making as well. And that is what differentiates both products.

Anchorseal is a premium type of wax emulsion also known as an end sealer. It prevents the logs and hardwoods from drying splits. It balances the moisture loss from the log or wood up to 90%.

Anchorseal 2 is also the same type of wax emulsion. However, it’s made more naturally with plant-based polymers. It’s made out of renewable materials and has less petroleum-based material. It’s more of a hybrid type of end-sealer that protects woods from degradation.

Winner: Anchorseal 2 is eco-friendly. However, Anchorseal is not. So, the winner is Anchorseal 2.

No products found.

2. Stability

Anchorseal has a thicker coating than Anchorseal 2. Most users have complained about how Anchorseal 2 has a thin coating. It easily breaks and doesn’t prevent the up-taking as good as Anchorseal. 

In fact, you’d need to apply multiple coatings for a similar result as Anchorseal. So, it’s not up to the quality the manufacturers claim. Anchorseal 2 only works better for greenwoods.

The original Anchorseal gives a thicker coating on the slab woods. It stays for longer times and prevents checking of the wood. 

Winner: The original Anchorseal wins.

No products found.

3. Ease of Application

The applying procedure for Anchorseal and anchorseal 2 is almost the same. In both products, you’d have to use either a roller. brush, or a sprayer. The best choice here is to use a sprayer.

If you’re not sure which sprayer equipment to use, we can recommend one. Here is some good sprayer equipment you can use to apply Anchorsealers-

If a sprayer is too costly for you to manage there’re options as well.

The second coat must be applied within 15 minutes to work properly. So, it can be said that the application procedure itself has no difference. However, it is advised that Anchorseal 2 requires heavier coatings. And this is where the problem arises. 

You can always use a brush or roller.  

The result you’d get from two coatings from both products, won’t be the same. As we mentioned before, Anchorseal 2 will have a rather thin sealing. To make it up to the mark, you’d have to apply more coatings.

Applying more coats takes more effort and takes a lot of time. With less time and effort you’d get a better end sealing for the wood. Needless to say, even after all that work, the woods may crack. So, it’s definitely better to use the original version.

For further protection of your wood, don’t forget to spray lacquer on it. This will not only provide more shine to the wood, it’ll also protect it.

Winner: Anchorseal 1 win.

4. Cost

There isn’t much of a cost difference between both products. But, some brands do charge more for Anchorseal 2. They claim that the production cost for Anchorseal 2 is more than Anchorseal 1.

Because Anchorseal 2 is said to be eco-friendly. However, after evaluating its quality we can’t say that it’s worth your money. It’s better to stick to using the original version of Anchorseal.

Winner: Anchorseal 1 is the winner here.

Hopefully, now you understand why we suggest you pick Anchorseal over Anchorseal 2.

How To Use Anchorseal: Step-By-Step

Anchorseal is a brand of wood sealer commonly used to prevent the ends of freshly cut lumber from cracking or splitting due to moisture loss. Here’s how to use Anchorseal effectively:

Materials You’ll Need:

  • Anchorseal or similar wood sealer product.
  • Paintbrush or sponge brush.
  • Disposable gloves (optional).

Step 1: Prepare The Wood

Ensure that the wood you’re sealing is freshly cut. Anchorseal is typically used on the exposed end grain of logs, branches, or lumber to prevent moisture loss and subsequent cracking.

Step 2: Shake Or Stir The Anchorseal

If the Anchorseal has been sitting for a while, it might have separated. Gently shake the container or stir the product to ensure it’s well-mixed.

Step 3: Application

Use a paintbrush or sponge brush to apply a generous coat of Anchorseal to the exposed end grain of the wood. The sealer should cover the entire end surface and a bit of the surrounding wood to ensure effective protection.

Make sure to apply a uniform layer without leaving any gaps or thin spots.

Step 4: Drying Time

Anchorseal needs some time to dry. The exact drying time can vary depending on the environmental conditions, but typically it should be touch-dry within a few hours.

Step 5: Additional Coats (Optional)

If you’re dealing with larger pieces of wood or especially porous wood, you might consider applying a second coat of Anchorseal after the first one is dry. This will provide extra protection against moisture loss.

Step 6: Clean Up

Clean your paintbrush or sponge brush immediately after use. You can use mineral spirits or a similar solvent to clean up any residue.

Step 7: Storage of Anchorseal

Seal the container of Anchorseal tightly after use to prevent it from drying out. Store it in a cool, dry place away from direct sunlight.

Remember that Anchorseal is specifically designed for sealing the ends of freshly cut wood. It’s not a general-purpose wood finish, so avoid using it for other purposes like staining or varnishing.

Frequently Asked Questions

Can wet wood be sealed?

Applying a sealer on damp or dirty wood won’t be fruitful. First, you’d need to wash the wood with a wood cleaner properly. Dry the wood and then apply a sealer.

How to air-dry wood slabs?

Gather the wood slabs in an open area that’s exposed to winds. Now, prepare a foundation for the slabs to stay on. Lay some perpendicular sticks between each slab so that moisture can leave the space.

How to remove Anchorseal from the wood surface?

Removing Anchorseal from the woods is easy. You can use a hot hairdryer or a heat gun to melt it. Wipe them off with paper or rags. Solvents like Naptha, alcohol, and mineral spirits are also can be used.

EndNote

That was everything from us regarding the debate on anchorseal vs anchorseal 2. We have covered the main differences between both products.

So, hopefully, you were able to make up your mind by now. That’s it for today. See you next time!

Kevin Smith

Leave a Comment

Your email address will not be published. Required fields are marked *