How to Thin Emerald Urethane Trim Enamel? (Shown A to Z)

Bought the Emerald urethane trim enamel but don’t know how to thin it? Maybe you see different mixture ratios available keeping the paints durable and perfect for the wall! 

Well, we are going there. In this article, we will unfold everything related to the thinning procedure. 

So, how to thin Emerald urethane trim enamel actually?

Choosing an appropriate thinner is your first task. Then, you need to utilize the right amount of thinner while mixing in the paint. Reading the manual might give you a complete idea of the measurement. And finally, test the mixture and estimate the results.

Bet you are not seeing the whole picture here! Worry not, we prepare this whole article directing you to know this procedure in more detail. 

So, let’s keep aside this tip of the iceberg and explore at our level best!

Can You Thin Emerald Urethane Trim Enamel?

Before moving towards the how-to process, let’s keep the mixing concept clear. 

This water-based enamel withstands yellowing compared to other conventional oil-based coatings. Along with that, this paint might create a sturdier durable finish. 

Seeing these benefits ongoing might not require a thinning process at all. And, you will find thinning a suitable way too all around. So, what should be your approach?

Typically, thinning Emerald urethane trim enamel is suggested not to exceed more than 10%. Actually, the more you thin the trim enamel, the more changes inside it will be visible. 

What inner transformations are we talking about? Well, Emerald urethane paints contain different chemical properties. And, these are quite vital to make paints happen. 

However, thinning might affect the properties. As a result, negative impacts might be found often due to this transformation! 

Got Emerald urethane thicker than expected? Then, you might make it thinner a bit more. But keep in mind not to exceed 25% at any cost. 

How to Thin Emerald Urethane Trim Enamel?

Enough of the mixing method to discuss! As a mindful reader, hopefully, you will take extra care of that! 

Now, we will show you a brief procedure for thinning Emerald step by step. So, let’s carry this on!

Step 1: Picking a Suitable Thinner

You hear this right! Exploring the most appropriate thinner determines whether your painting goes well or not. 

In the meantime, paint thinners are nothing but a solvent. 

Mineral spirits or acetone satisfactorily can be the ideal thinners. So, you might utilize them as a traditional thinner such as turpentine. Along with that, common household products are also eligible to act as thin paint. 

In terms of availability, thinners do not create any issues. You can easily avail them from local stores. 

While picking the thinners, sticking these in the head is quite crucial. 

But first, let’s just understand the type of your painting. Most DIY users slip this advice to carry on! 

Are you spraying paint onto a surface or basement? Then, you might get a thinner mixture of paint quite suitable and user-friendly. 

At the same time, paint thinners will not suit oil-based paints. These can only fit the latex or acrylic latex paints

Get the best acrylic latex paints from our recommendation!

Meanwhile, Emerald urethane trim enamel is the key name for applying this thinner. And also, reading the labels on the front and manuals too put a crucial impact. 

Step 2: Utilizing Right Portions of the Thinner

Well, we bet you have got clearer hints on this from our previous section. Typically, this step is all about mindfulness and proper observation for this task. 

Getting thinners is not all. You need to mix it in the right measurement for a better result. 

By nature, Emerald requires less thinning to add. Keeping this in mind, check the paint container labels at first. 

Similar to most manufacturers, Emerald enamel also comes with clear instructions on its label. By reading this, you will know the appropriate mixture ratio.

Thinning for general intents demands a 3:1 or 4:1 ratio of paint to thinner. Experts also approve of this ratio measurement. 

Relevantly, keeping the amount of paint more increased than the amount of paint thinner is crucial. Get your paint too thin? 

Then, you might face color shades being lighter than expected. And nobody might like it to face this situation, including you too. 

A similar impact might cause problems with Valspar Paint!

So, to mix the paint and thinner better, obey all the directions procured by the manufacturer.

Here’s an additional tip for you!

Cold paints such as emerald urethane trim enamel might always appear thicker. And, this might be so deceiving, isn’t it? 

In this case, adding thinner to that paint at room temperature. It automatically helps restrict you from adding too much thinner. 

Make sure the paint layer entirely covers the surface. And, ensuring the paint not sprinting or dripping overly might give you flexibility throughout the process. 

Step 3: Testing the Mix

For this, applying two coats of the thinner mixture is required. Once you apply this on the desired surface, step back afterward to estimate the result. 

Make sure the paint layer entirely covers the surface. That’s how you can finally complete the thinning process.

Is Thinning Emerald Paint Necessary?

Now you know if thinning is accepted in the Emerald urethane trim enamel or not. But setting a limit will be the best decision for you! 

However, experts do not patronize thinning of the paint at all. But, latex paints like Emerald urethane trim enamel might require thinning. 

More specifically, this paint is an acrylic latex type. Can’t relate to the fact? Though latex paint contains a larger part of water, this is quite thicker. 

So, more likely this paint is a hybrid. Unlike this, there are several differences between acrylic and latex paints.

Compare this to different oil-based paint types! And later, you will find Emeralds a whole lot thicker than you expect! 

As paints are meant to be sprayed away, the thicker nature of paints always creates problems. Once you go through thinning it, spraying a fine haze of paint will be possible. 

Apart from checking the mixture ratio, another big factor usually might be underestimated. Checking the viscosity of your paint plays a vital role. 

How would you measure that? Well, get a stick to mix the paint. Observe if the paint clings to the stick while taking it out from the mixture. 

Also, does the paint drop back in grand chunks? If both scenarios are found, don’t hesitate to count the paint thicker.

Be it the spray guns, rollers, or even brushes! That’s the way to measure the paint thickness.

Tool Requirements for Paint Finishing

If we talk about its sprayer, then HVLP guns come into the picture. While putting paints in this gun, you might require a more extensive needle and a nozzle. 

Mostly, experts suggest having 5 or even 6 fluid needles and nozzles for the painting. However, this requirement might get altered in terms of your HVLP setup indeed. 

Several brands serve cheaper HVLP guns such as Harbor Freight. You might take one from there. But it’s recommended not to get a cheaper gun. In the meantime, you might require a 5-stage turbine. 

It will be found while picking brands such as Graco or Titan HVLP. In your final finishing, trying this turbine might make things easier. 

Now you know the vital role of finishing! Top 5 finishing for workbench might provide you ideas more precisely!

Along with that, brushing and rolling- both are on your hand. Which method should you apply? 

But we suggest using a high-quality nylon brush or roller cover for your painting. However, all good even if it’s polyester. 


How Can I Thin Paint For HVLP?

Starting by adding 10 percent water to paints and melding entirely can be the right approach. Add a little amount of water again if the paint is too thick. But exceeding water by more than 25 percent can be more threatening to your paint. Excessive thinning declines the paint’s adhere capability.

Is Sherwin Williams Emerald Urethane Trim Enamel Oil Based?

The Emerald Urethane Trim enamel comes as a hybrid structure. As a result, it might behave as acrylic paint. Along with that, you might see these showing characteristics of oil-based alkyd paint. Sherwin Williams Emerald urethane trim enamel does not amber over time and it might dry harder. 

Is Sherwin Williams Emerald Worth It?

Yes, Sherwin Williams Emerald Semi-Gloss paint performs extraordinarily. Your door and trim can highly suit this paint. And, it is quite easy to use and versatile. Emerald fixes to a harder and tighter film compared to other brands. Doors get protection from the overall integrity of the paint. 

Final Words

Now you get a clear idea of how to thin Emerald urethane trim enamel. We have tried to cover every possible aspect related to this that you might know. 

Hopefully, you liked our article. Let us know if you have got any queries!

Best of luck with your painting activities!

Kevin Smith

Leave a Comment

Your email address will not be published. Required fields are marked *