How to Add Wood to Wrought Iron Fence: 6 Easy Steps

By / September 23, 2022

Fences are a crucial component of a home. Since they serve as borders and a means of property security. Any material, like wood, iron, and mid-rails, can be used to create it. Adding wood to the wrought fence gives privacy.

Then how to add wood to a wrought iron fence?

First, choose the amount of wood you’re going to need. Then remove the current metal work if you have any. Get all the stuff you need, such as nails drills screws, etc. You need to clean up your iron to add adhesive. Finally, apply adhesive to the metal parts and attach your woods. And that’s it.

However, people have been using corten steel or wooden fences for decades. These fences can be seen most often if you notice them. I’ll go through how to attach wood to an existing wrought iron fence in this article. 

Items that You’re Going to Need

You will require a few pieces of equipment and materials to build your desired fence. This equipment will help you to add wood to the wrought iron fence. This contains: 

  • Nails
  • Drills 
  • Masonry bit
  • Screws 
  • A Saw 

Before beginning the project, make sure you have enough of these. 

Step-By-Step Guide: To Add Wood to Wrought Iron Fence

So let’s get going. Using brackets is the most typical method of fastening wood to an existing wrought iron fence. 

There are several sizes and brackets are simple to install. Moreover, they come in different shapes, including square, oval, and rectangular.

Step 1: Choose the Amount of Wood You Need

Choosing how much wood you’ll require is the first step you’re going to take. Make sure that this won’t have any impact on the wall’s construction. If so, think about constructing a new one. 

Choosing wood is a difficult thing. You need to choose woods for the long run. In that case, choose the best wood for your fence. To make sure it goes for a longer period of time.

Step 2: Remove the Current Metalwork

Next, you must remove all or a portion of the current metalwork to attach the wood. The wood slats are then fastened at regular intervals. Attach it firmly to prevent the structure from collapsing under the weight of the wood.

Step 3: Taking Preparation to Add Wood to Wrought Iron Fence

Now you’re going to require your tools to add wood to the wrought iron fence. Make sure you have an adequate supply of these before starting the project.

You may need to remove or install your old wrought iron fence. Remove the old iron fence and begin your work. It won’t take much time if you have prepared yourself according to it.

Step 4: Remove Your Previously Installed Wrought Iron Fence

If you already have a wrought iron fence, the next step will be removing it. You should remove it before you add the wood.

Remove any attached metal objects from the concrete using a saw equipped with a metal-cutting blade. You are going to need a masonry bit and a drill. With these, you can create holes in the concrete for the saw’s blade to fit through. If necessary, use a hacksaw for more delicate cuts.

Step 5: Clean Your Existing Iron Fence

Make sure the wrought iron fence is thoroughly clean and free of any debris. Also, anything that might get in the way before you add wood slats on top of it. 

To remove any dust particles, thoroughly wash all of the metal components. You can use soap and water before sprinkling baking soda on them. This will aid in the adhesive’s optimal adhesion.

Step 6: Apply Adhesive to the Metal Parts

The next step is to apply wood glue or adhesive on both sides of the metal parts. These adhesives often come in tubes with nozzles for applying glue to metal fencing. 

There are so many adhesives you’ll find in the local markets. But choosing the best out of it is quite difficult. So choose the best adhesive for your work. Because you don’t want to go through this again. 

To add wood to wrought iron fences you can use Gorilla 6206005 wood glue. It has a natural wood color finish. So it won’t leave any unwanted mark on your woods. 

It is ideal for DIY projects because of this. After you glue the laminating woods together, all of your creations won’t have a horrific appearance. Additionally, if you’re a skilled carpenter looking to create pleasing works, this is the one.

Make sure you use the bare minimum and avoid using too much adhesive. Because when wood slats are put above it, it will leak. Also, be sure not to overlook any edges or holes and fully seal them with glue.

Fix wood slats over the metal components of the existing wrought iron fence after applying glue. In the case of pre-assembled wooden fencing, use the nails supplied by the maker. 

Use galvanized screws to fasten wooden slats to a wooden fence. It’s just a bunch of individual planks, that’s all it is. The screw should have a length greater than the width of the wooden slats.

To stop moisture from entering the fence, caulk the spaces between the planks. Finishing touches like ornaments and other decorations should be added.

Use screws rather than nails whenever possible. Because they grip strongly while also making disassembling easier when necessary. Apply wood glue to the top surface of a wrought iron fence before adding wood. Also, ensure that the metal components and the wooden slats adhere tightly.

So, now you’re all done, and good to go. 

Some Tips that You Can Follow

Here are some recommendations for building a wooden fence over a wrought iron fence. 

  • Measurements must be taken before the job can be started.
  • The second is to only use a thin film of glue; avoid using too much. 
  • Third, entails applying the least amount of adhesive possible to completely cover all crevices and corners.
  • Fourth, is to ensure that installation happens in dry weather. So that it can’t cause any impact on the process. 

Water or any moisture can cause a distance between wood and the metal fence. The woods get expanded because of water or moisture. 

What Are the Cons of Adding Wood to Wrought Iron Fence?

Adding wood to your iron fence can give you an aesthetic look on your house. Adding more units to your wrought iron fence to give it more depth and texture. It will improve its appeal if it already includes some wood portions.

Wrought iron fences are very durable, prolonged exposure to the elements could lead them to rust. Wood gives the fence a second layer of defense against wetness and restores its aesthetic appeal. 

The additional advantage is that you have a variety of carefree woods to pick from. Such as cedar or redwood, which won’t decay in contrast to untreated pine, oak, etc. These woods require periodic cleaning and repainting.

Regardless of the style, design, or shape, all wrought iron fences have sharp edges. It is quite risky to have them around. By softening these edges with wood, you can give your loved ones even more safety.

If you live near the coast or in an area where winds can be strong at certain times of the year. The addition of wood will sustain your fencing. Since it adds weight, which wrought iron doesn’t provide on its own. 

Naturally, cedar and redwood are rot-resistant. It has the ability to resist salty winds or any strong air.

FAQs

How Do I Make My Iron Fence Private?

Use plants to make a screen that helps create a private space inside your fence. Also, you can add woods to your iron fence. Utilize trees or tall plants to cover the area above small fences. On higher fences, let climbing vines do the labor for you.

What Glue Will Stick Wood To Metal?

The two-part epoxy or acrylate is the best glue for joining metal and wood. While contact cement and wood glue with a polyurethane basis also work well. Compared to metal, wood is more permeable and tends to be less dense.

How Long Would A Wrought Iron Fence Last?

A wrought iron fence should endure a lifetime, if not centuries. The French Quarter of New Orleans has several well-known wrought iron balconies back to the 1700s. While Notre Dame Cathedral in Paris has particularly lovely ironwork that has withstood the test of time.

Conclusion

So now you know how to add wood to a wrought iron fence. I hope you get a clear idea about it. 

The iron fence itself is very strong. Adding wood to it becomes stronger. Also, it provides privacy. 

That’s all for today. Thank you and have a good day!

Kevin Smith
Latest posts by Kevin Smith (see all)
Related posts:
  • 5 Best UV Protection for Wood (Is It Really Needed)
  • How to Cut 45 Degree Angle Without Table Saw?
  • How Hard Is Acacia Wood? (What You Needed To Know)

    • Leave a Comment

    Your email address will not be published. Required fields are marked *